云南地區防火橋架和鍍鋅橋架用途差別

   云南地區電纜電線安裝使用主要是防火橋架和鍍鋅橋架，在不同的場地要求不同，下面介紹他們的用途

   云南防火橋架適用于 10KV 以下的電力電纜，并可用于控制室內架空電纜、照明配線等的敷設；防火板橋架主要由粘合劑復合的耐火隔板、與金屬結合的耐火底板及其它耐火基材組成，在其上加裝耐火涂料。云南昆明防火橋架在遇火后不能燃燒，阻隔了火災的蔓延。防火橋具有極好的防火阻燃效果，耐火、耐油、耐腐蝕、無毒、無污染、整體安裝方便等特點。防火涂料有涂層薄、耐火極限高、粘接力強的特點。 

    云南鍍鋅橋架，一般情況下應用在潮濕、腐蝕性強環境下。根據工地需求分為熱鍍鋅和電鍍鋅。

    熱鍍鋅云南橋架工藝：把鋼或鑄件浸入熔化的鋅溶液中，在其表面上形成鋅-鐵合金或鋅-鋅合金及鋅-鐵合金涂層的工藝和方法。

    冷鍍鋅云南電纜橋架工藝：對鋼進行化學清洗后，將其放入含氧化鋅的鍍液中。DC 一極接鋼，一極接鍍鋅板。通電后，鋅在分子狀態下被鋼材表面置換。若加亮劑鈍化，則表現為彩云狀亮鍍層。鋼結構應用的鍍鋅一般防銹效果不太好，主要鍍鋅量達不到，鍍鋅不均勻，一般 2、3 年生銹，質量差的暴露在潮濕環境下十幾天生銹，熱鍍鋅層厚，耐腐蝕性強。冷鍍鋅層比熱鍍鋅層亮，但薄，耐腐蝕性弱。

Yunnan area cable and wire installation and use is mainly fireproof bridge and galvanized bridge, different requirements in different sites, their use is introduced below

Yunnan fire bridge is suitable for power cables below 10KV, and can be used for laying overhead cables and lighting wiring in the control room; Fireproof board bridge is mainly composed of adhesive composite refractory partition board, refractory base plate combined with metal and other refractory substrate, on which fire retardant coating is installed. Yunnan Kunming fire bridge in the fire can not burn, cut off the spread of the fire. Fireproof bridge has excellent fire retardant effect, fire resistance, oil resistance, corrosion resistance, non-toxic, pollution-free, convenient installation and so on. Fire retardant coating has the characteristics of thin coating, high fire resistance limit and strong adhesion.

Yunnan galvanized bridge is generally used in wet and corrosive environment. It can be divided into hot dip galvanizing and electric galvanizing according to site demand.

Hot-dip galvanizing Yunnan bridge process: the process and method for dipping steel or casting into molten zinc solution and forming zinc-iron alloy or zinc-zinc alloy and zinc-iron alloy coating on its surface.

Cold galvanized Yunnan cable bridge process: after chemical cleaning of steel, put it into the plating solution containing zinc oxide. DC one pole is connected with steel, one pole is connected with galvanized sheet. After electricity is applied, the zinc is replaced by the steel surface in its molecular state. If the brightening agent is passivated, it shows a bright cloud coating. Steel structure application of galvanized anticorrosion effect is not very good, the main amount of galvanized is not up to, galvanized uneven, generally 2, 3 years of rust, poor quality exposure to rust in a humid environment for more than ten days, hot dip galvanized layer thick, strong corrosion resistance. Cold galvanized layer is brighter than hot galvanized layer, but thin, weak corrosion resistance.