昆明橋架與你分享電纜橋架安裝經驗

昆明橋架與你分享電纜橋架安裝經驗

一、電纜橋架要在小于1%的坡度范圍內安裝
二、用電設備與電纜橋架之間要保證小于半米的距離，當橋架與設備交越。
三、平行電纜橋架之間的水平距離要大于0.6米。
四、橋架安裝要求不低于地面2.2米，距離頂部要大于0.3米，橋架寬帶大于100.
Kunming Bridge Frame to share with you the experience of cable bridge frame installation
First, the cable bridge frame shall be installed within a slope range of less than 1 %
Second, the distance between the power equipment and the cable bridge frame must be guaranteed to be less than half a meter, when the bridge frame and the equipment cross.
Third, the horizontal distance between parallel cable bridges is greater than 0.6 meters.
Fourth, the bridge frame installation requirements are not less than 2.2 meters on the ground, the distance from the top is greater than 0.3 meters, and the bridge frame broadband is greater than 100.